User's Manual

Working with reports and displays
hwc_reports.fm
Viewing reports
A31003-W1050-U100-2-7619
, March 2008
306 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
•TA – Telnet access (enabled or disabled).
•BD – Broadcast disassociation (enabled or disabled). If enabled, whenever
the Wireless AP is going offline in a controlled fashion it will send the
disassociation frame to all its clients as a broadcast.
•DV – Diversity
•P/To – Poll timeout. If polling is enabled, a numeric value.
•P/I – Poll interval. If polling is enabled, a numeric value.
•Wired MAC – The physical address of the Wireless AP's wired Ethernet
interface.
• Description – As defined on the AP Properties page.
•Failure Maintn. – Maintain MU sessions on Wireless AP when the Wireless
AP loses the connection to the HiPath Wireless Controller.
•Assn – Assignment (address assignment method)
•Static Cfg – Wireless AP's IP address if statically configured (same as the
Static Values radio button on the AP Static Configuration page).
•Static Cfg IP – Statically Configured IP. If the Wireless AP's IP address is
configured statically, the IP address is displayed.
•Netmask – If the Wireless AP's IP address is configured statically, the
netmask that is statically configured for the Wireless AP.
• Gateway – If the Wireless AP's IP address is configured statically, the IP
address of the gateway router that the Wireless AP will use.
• HWC Search List – The list of IP addresses that the Wireless AP is
configured to try to connect to in the event that the current connection to the
HiPath Wireless Controller is lost.
To export and save a report in XML:
1. On the report page, click Export. A Windows File Download dialog is
displayed.
2. Click Save. A Windows Save As dialog is displayed.
Note: If your default XML viewer is Internet Explorer or Netscape, clicking
Open will open the exported data to your display page. You must right-click
to go back to the export display. The XML data file will not be saved to your
local drive.
3. Browse to the location where you want to save the exported XML data file,
and in the File name box enter an appropriate name for the file.
4. Click Save. The XML data file is saved in the specified location.