User's Manual

Working with reports and displays
hwc_reports.fm
Viewing the displays
A31003-W1050-U100-2-7619
, March 2008
302 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
• Search for a client by MAC address, user name, or IP address, and typing the
search criteria in the box
• Define the refresh rates for this display
• Export this information as an xml file
Mobility Tunnel Matrix
• Provides connectivity matrix of mobility state
• Provides a view of:
• Tunnel state
• If a tunnel between controllers is reported down, it is highlighted in red
• If only a control tunnel is present, it is highlighted in yellow
• If data and control tunnels are fully established, it is highlighted in green
• Tunnel Uptime
• Number of clients roamed (Mobility loading)
• Local controller loading
• Mobility membership list
A HiPath Wireless Controller is only removed from the mobility matrix if it is
explicitly removed by the administrator from the Mobility permission list. If a
particular link between controllers, or the controller is down, the corresponding
matrix connections are identified in red color to identify the link.
The Active Clients by VNS report for the controller on which the user is home
(home controller) will display the known user characteristics (IP, statistics, etc.).
On the foreign controller, the Clients by VNS report does not show users that have
roamed from other controllers, since the users remain associated with the home
controller's VNS.
The Active Clients by AP report on each controller will show both the loading of
local and foreign users (users roamed from other controllers) that are taking
resources on the AP.
Note: The statistics from the mobility manager are updated every thirty seconds,
regardless of the refresh period for the displays.