User's Manual

hwc_reports.fm
Working with reports and displays
Viewing the displays
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 301
• Mobility Tunnel Matrix – Displays a cross-connection view of the state of
inter-controller tunnels, as well as relative loading for user distribution across
the mobility domain
To view mobility manager displays:
1. From the main menu, click Reports & Displays. The HiPath Reports &
Displays page is displayed.
2. Click the appropriate mobility manager display:
• Client Location in Mobility Zone
• Mobility Tunnel Matrix
The colored status indicates the following:
•Green – The mobility manager is in communication with an agent and the
data tunnel has been successfully established.
• Yellow – The mobility manager is in communication with an agent but the
data tunnel is not yet successfully established.
•Red – The mobility manager is not in communication with an agent and there
is no data tunnel.
Client Location in Mobility Zone
You can do the following:
• Sort this display by home or foreign controller