User's Manual

hwc_controlleravailmobility.fm
Availability, mobility, and controller functionality
Availability overview
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 255
3. To enable availability, select the Paired option.
4. Do one of the following:
• For a primary controller, in the Wireless Controller IP Address box, type
the IP address of the physical port of the secondary HiPath Wireless
Controller. This IP address must be on a routable subnet between the two
HiPath Wireless Controllers.
• For a secondary controller, in the Wireless Controller IP Address box,
type the IP address of the Management port or physical port of the
primary HiPath Wireless Controller.
5. Do one of the following:
• To set this HiPath Wireless Controller as the primary connection point,
select the Current Wireless Controller is primary connect point
checkbox.
• To set this HiPath Wireless Controller as the secondary connection point,
clear the Current Wireless Controller is primary connect point
checkbox.
If the Current Wireless Controller is primary connect point checkbox is
selected, the specified controller waits for a request. If the Current Wireless
Controller is primary connect point checkbox is cleared, the specified
controller sends a connection request. Confirm that one controller has this