User's Manual

hwc_reports.fm
Working with reports and displays
Viewing the displays
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 295
10.1.1 Viewing the Wireless AP availability display
This display reports the active connection state of a Wireless AP (availability to
the HiPath Wireless Controller for service). Depending on the state of the
Wireless AP, the following is displayed:
Green – Wireless AP is configured on the HiPath Wireless Controller and is
presently connected.
Red – Wireless AP is configured on the HiPath Wireless Controller but is
presently not connected (not available to service this HiPath Wireless Controller).
In normal operations, when the HiPath Wireless Controller Availability feature is
enabled, the local Wireless APs are green, and the foreign Wireless APs are red.
If the other HiPath Wireless Controller fails, and the foreign Wireless APs connect
to the current HiPath Wireless Controller, the display will show all Wireless APs
as green. If the Wireless APs are not connected they show up as red.
10.1.2 Viewing statistics for Wireless APs
Two displays are snapshots of activity at that point in time on a selected Wireless
AP:
• Wired Ethernet Statistics by Wireless AP
• Wireless Statistics by Wireless AP
The statistics displayed are those defined in the 802.11 MIB, in the IEEE 802.11
standard.
To view wired Ethernet statistics by Wireless AP:
1. From the main menu, click Reports & Displays. The HiPath Reports &
Displays page is displayed.
2. Click the Wired Ethernet Statistics by Wireless AP display option. The
Wired Ethernet Statistics by Wireless APs display opens in a new browser
window.