User's Manual

Working with the Mitigator
hwc_mitigator.fm
Maintaining the Mitigator list of APs
A31003-W1050-U100-2-7619
, March 2008
290 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To delete a friendly AP:
1. From the main menu, click Mitigator. The Mitigator page is displayed.
2. Click the Friendly APs tab.
3. In the Friendly AP Definitions list, click the access point you want to delete.
4. Click Delete. The selected access point is removed from the Friendly AP
Definitions list.
5. To save your changes, click Save.
To modify a friendly AP:
1. From the main menu, click Mitigator. The Mitigator page is displayed.
2. Click the Friendly APs tab.
3. In the Friendly AP Definitions list, click the access point you want to modify.
4. Modify the access point by making the appropriate changes.
5. To save your changes, click Save.
9.7 Maintaining the Mitigator list of APs
To maintain the Wireless APs:
1. From the main menu, click Mitigator. The Mitigator page is displayed.
2. Click the AP Maintenance tab. Inactive APs and known third-party APs are
displayed.
3. Select the applicable APs.