Manualshelf

User's Manual

ManualsBrandsSiemens Communications ManualsElectronicsHiPath Wireless AP, Altitude 450, Altitude 451
31323334353637383940
Working with the Mitigator
hwc_mitigator.fm
Running Mitigator scans
A31003-W1050-U100-2-7619
, March 2008
284 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
• Scan Groups
• Friendly APs
• AP Maintenance
Note: A scan will not run on an inactive AP, even though it is displayed as part of
the Scan Group. If it becomes active, it will be sent a scan request during the next
periodic scan.
Note: The HiPath Wireless 802.11n APs can not be added to the Scan Group
because they are not equipped to carry out scanning.
To run the Mitigator scan task mechanism:
1. From the main menu, click Mitigator. The Mitigator page is displayed.
2. Click the Scan Groups tab.
3. In the Scan Group Name box, type a unique name for this scan group.