User's Manual

Working with the Mitigator
hwc_mitigator.fm
Enabling the Analysis and data collector engines
A31003-W1050-U100-2-7619
, March 2008
282 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
• Runs an Analysis Engine that processes the scan data from the data collector
through algorithms that make decisions about whether any of the detected
APs or clients are rogue APs or are running in an unsecure environment (for
example, ad-hoc mode).
Note: In a network with more than one HiPath Wireless Controller, it is not
necessary for the data collector to be running on the same controller as the
Analysis Engine. One controller can be a dedicated Analysis Engine while the
other controllers run data collector functionality. No more than one Analysis
Engine can be running at a time. You must ensure that the controllers are all
routable.
9.2 Enabling the Analysis and data collector engines
Before using the Mitigator, you must enable and define the Analysis and data
collector engines.
To enable the Analysis engine:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. In the left pane, click Mitigator. The Mitigator Configuration page is
displayed.