User's Manual

hwc_3rdpartyaps.fm
Working with third-party APs
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 279
3. In the Assignment by drop-down list, click SSID.
4. To define a VNS for a third-party AP, select the Use 3rd Party AP checkbox.
5. Continue configuring your VNS, as described in Section 6.3.1, “Configuring
topology for a VNS for Captive Portal”, on page 165.
Note: Bridge Traffic at AP and MAC-based authentication are not available
for third-party VNSs.
Step 3 – Define authentication by Captive Portal and RAD policy for the
third-party AP VNS:
1. Click the Auth & Acct tab.
2. In the Authentication Configuration page, click Configure Captive Portal
Settings.
3. In the Captive Portal Settings page, define the Captive Portal configuration.
4. Click the RAD Policy tab.
5. Define the the filter IDs to match those in RADIUS server.