User's Manual

Working with third-party APs
hwc_3rdpartyaps.fm
A31003-W1050-U100-2-7619
, March 2008
278 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
3. Click the port, and in the Function box, click 3rd-party AP from the
drop-down list. Make sure that Management Traffic and SLP are disabled for
this port.
4. Connect the third-party access point to this port, via a switch.
Step 2 – Define a VNS for the third-party AP port:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane, type a name that will identify the new VNS in the Add subnet
box, and then click Add subnet. The name is displayed in the Virtual
Networks list. The Topology tab is displayed.