User's Manual

Availability, mobility, and controller functionality
hwc_controlleravailmobility.fm
Using controller utilities
A31003-W1050-U100-2-7619
, March 2008
274 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To test or record IP address connections:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. In the left pane, click Utilities. The Wireless Controller Utilities page is
displayed.
3. In the Target IP Address box, type the IP address of the destination
computer.
4. To test a connection to the target IP address, click Ping. A pop-up window is
displayed with the ping results.
The following is an example of ping results.
5. To record the route through the Internet between your computer and the
target IP address, click Trace Route.
The following is an example of trace results.