User's Manual

Availability, mobility, and controller functionality
hwc_controlleravailmobility.fm
Enabling SNMP
A31003-W1050-U100-2-7619
, March 2008
272 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
7.6.2 Enabling SNMP on the HiPath Wireless
Controller
You can enable SNMP on the HiPath Wireless Controller to retrieve statistics and
configuration information.
To enable SNMP Parameters:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. In the left pane, click SNMP. The Simple Network Management Protocol
page is displayed.
3. Type the following:
• Contact Name – Specifies the name of SNMP administrator.
• Location – Specifies the location of the SNMP administration machine.
• Read Community Name – Specifies the community name for users with
read privileges.
• Read/Write Community Name – Specifies the community name for
users with read and write privileges.
• SNMP Trap Port – Specifies the destination port for SNMP traps. The
industry standard is 162. If left blank, no traps are generated.