User's Manual

Availability, mobility, and controller functionality
hwc_controlleravailmobility.fm
Enabling SNMP
A31003-W1050-U100-2-7619
, March 2008
270 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
• SIC Password – Specifies your Secure Internal Communication (SIC)
password. You can use the Unmask button to display the password.
5. To save your changes, click Save.
6. To create the certificate to be sent to the ELA Management Station, click
Generate Certificate.
If the certificate is properly generated and the connection with the ELA
Management Station is made, the Connection Status section displays the
following message:
OPSEC Connection OK
If there is an error in generating the certificate or establishing the connection,
the Connection Status section displays the following message:
OPSEC Connection Error
7.5.1 ELA Management Station events
The events for the ELA Management Station are grouped under Siemens and are
mapped as info events and alert events. The alerts include:
• Wireless AP registration and/or authentication failed
• Authentication User Request unsuccessful
• RADIUS server rejected login (Access Rejected)
• An unknown AP has attempted to connect. AP authentication failure.
• A connection request failed to authenticate with the CM messaging server.
This may indicate port-scanning of the HiPath Wireless Controller, or a back-
door access attempt.
• Unauthorized client attempting to connect
7.6 Enabling SNMP
The HiPath Wireless Controller, Access Points and Convergence Software
system supports Simple Network Management Protocol (SNMP), Version 1 and
2c. SNMP, a set of protocols for managing complex networks, is used to retrieve
HiPath Wireless Controller statistics and configuration information.