User's Manual

Availability, mobility, and controller functionality
hwc_controlleravailmobility.fm
Configuring Check Point event logging
A31003-W1050-U100-2-7619
, March 2008
268 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To set Network Time Protocol:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. In the left pane, click Network Time. The Network Time page is displayed.
3. To use Network Time Protocol, select the Use NTP radio option.
4. In the Use System Time box, type the time setting using the mm-dd-yyyy
hh:mm format.
5. In the Time Server 1 box, type the IP address or FQDN of a standard NTP
Time Server. You can repeat this step for the Time Server 2 and Time Server
3 boxes.
6. To apply your changes, click Apply.
7.5 Configuring Check Point event logging
The HiPath Wireless Controller can forward specified event messages to an ELA
server using the OPSEC ELA protocol - Event Logging API (Application Program
Interface). On the ELA server, the event messages are tracked and analyzed, so
suspicious messages can be forwarded to a firewall application that can take
corrective action.
Check Point created the OPSEC (Open Platform for Security) alliance program
for security application and appliance vendors to enable an open industry-wide
framework for inter operability.
When ELA is enabled on the HiPath Wireless Controller, it forwards the specified
event messages from its internal event server to the designated ELA
Management Station on the enterprise network.
Note: Before you set up the HiPath Wireless Controller, you must first create
OPSEC objects for HiPath Wireless Controller in the Check Point management
software. The name and password you define must also be entered into the
Check Point Configuration page.
To enable and configure Check Point:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. In the left pane, click Check Point. The Check Point Configuration page is
displayed.