User's Manual

hwc_appendixd.fm
SpectraLink Wireless Telephones
Configuring HiPath Wireless Controller for SpectraLink Telephones
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 425
4. Select the WPA v.2 radio button.
5. Under WPA v.2 section, select AES only from the Encryption drop-down
menu.
Note: The SpectraLinke telephones must also be for WPA v.2 security.
6. Enter the appropriate pass phrase in the Pre-shared key field.
7. Click Save.
D.2.5 Setting up Quality of Service (QoS)
To set up Quality of Service (QoS):
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration screen is displayed.
2. On the Virtual Network Configuration screen, click the QoS Policy tab.
3. Under the Wireless QoS section, select the following:
• Legacy