User's Manual

SpectraLink Wireless Telephones
hwc_appendixd.fm
Configuring HiPath Wireless Controller for SpectraLink Telephones
A31003-W1050-U100-2-7619
, March 2008
422 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration screen is displayed.
2. On the Virtual Network Configuration screen, click the Filtering tab. The
filtering rule for the Default filter is displayed in the centre pane.
3. Type the IP address of SVP server in IP/Subnet:port box.
4. From the Protocol drop-down menu, select UDP.
5. Click Add. The new filtering rule for the SVP server is displayed in the centre
pane.
6. Click Up. The filtering rule for the SVP server moves up, before the filter rule
for Default filter.
7. Type the IP address of SpectraLink Gateway in IP/Subnet:port box, and then
repeat steps 4 to 6.
8. Add the filtering rules for the IP addresses of all network elements as
explained in steps 3 to 6.
Note: You must ensure that all the filtering rules, including the ones for SVP/
Gateway and other network elements, are moved up, before the filtering rule
for the Default filter.
9. Select the Allow option of the Default filter.
10. Click Save.