User's Manual

SpectraLink Wireless Telephones
hwc_appendixd.fm
Configuring HiPath Wireless Controller for SpectraLink Telephones
A31003-W1050-U100-2-7619
, March 2008
420 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
Note: For a successful deployment, all the network elements in the SpectraLink
network should be provisioned to prioritize voice data.
D.2 Configuring HiPath Wireless Controller for SpectraLink Telephones
This section describes how to configure the HiPath Wireless Controller and
Wireless APs for use with SpectraLink Wireless Telephones.
You have to configure the following features in the HiPath Wireless Controller to
set it up for SpectraLink telephones:
• Radio properties
• SSID
• Filters
• Multicast configuration
• Security
• Quality of Service (QoS)
Note: The configuration process for SpectraLink telephones applies identically to
HiPath Wireless APs, HiPath Wireless Outdoor APs and HiPath Wireless 802.11n
APs, unless specified otherwise.
D.2.1 Setting up SSID
To set up the SSID:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration screen is displayed.
2. In the left pane, type a name that will identify the new VNS in the Add subnet
box.
3. Click Add subnet. The name is displayed in the Virtual Networks list. The
Topology tab is displayed.