User's Manual

optiPoint WL2 Configuration
hwc_appendixc.fm
HiPath Wireless Controller configuration
A31003-W1050-U100-2-7619
, March 2008
414 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To configure privacy settings:
1. Click the Privacy tab.
2. Configure the following privacy settings:
• The privacy settings on the HiPath Wireless Controller must match those
on the optiPoint WL2 phone.
• If the optiPoint WL2 phone is configured to use WEP, select the Static
Keys (WEP) option for the VNS.
To configure QoS policy settings:
1. Click the QoS Policy tab.
2. Configure the following QoS policy settings:
• For good voice quality and battery life, select WMM.
• If the VNS is shared with legacy devices that require priority but do not
support WMM, select Legacy.
• If applicable, select 802.11e or Enable U-APSD. (The next release of the
optiPoint WL2 may require .11e support).
Note: The Turbo Voice and Use Global Admission Control for Voice (VO)
options should be cleared. These options should not be used in the same
VNS as the optiPoint WL2. These features are not currently supported on the
optiPoint WL2.