User's Manual

hwc_appendixc.fm
optiPoint WL2 Configuration
HiPath Wireless Controller configuration
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 413
C.2 HiPath Wireless Controller configuration
The following settings must be configured on the HiPath Wireless Controller.
To configure a VNS topology:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. Configure the following VNS topology settings:
• A dedicated VNS must be used for WL2 phones. No other non-voice
client should be allowed in this VNS.
• In the Assignment by drop-down list, click SSID. The VNS must be a
non-RADIUS VNS.