User's Manual

optiPoint WL2 Configuration
hwc_appendixc.fm
optiPoint WL2 wireless telephone configuration
A31003-W1050-U100-2-7619
, March 2008
410 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To configure Quality of Service protocol settings:
1. In the left pane, click Quality of Service. The Quality of Service: Protocol
Settings page is displayed.
2. Configure the following Quality of Service settings:
• In the DSCP Class for Voice drop-down list, click Expedited
Forwarding to ensure maximum voice priority.
• In the DSCP Class for Signalling drop-down list, click Best Effort.
Under normal conditions Best Effort ensures a more reliable delivery for
Signaling than for Voice (more retries) at the expense of a potential higher
delay.
• In the VLAN Settings section, select None.