User's Manual

Regulatory information
hwc_appendixb.fm
Wireless APs 26XX and 36XX
A31003-W1050-U100-2-7619
, March 2008
400 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
B.2.5.3 AP2620 optional 3rd party external antennas
The AP2620 external antenna APs can also be used with optional certified 3rd
party antennas. However, in order to comply with the local laws and regulations,
an approval may be required by the local regulatory authorities. The following
optional antennas have been tested with and approved for use with the external
antenna model.
Caution: When using an approved 3rd party external antenna (other than the
default), the power must be adjusted according to these tables.
Professional installation
This device must be professionally installed. The following are the requirements
of professional installation:
• The device cannot be sold retail to the general public or by mail order. It must
be sold to dealers.
• Installation must be controlled.
• Installation must be carried out by licensed professionals (equipment sold to
dealers who hire installers)
• Installation requires special training (special programming and antenna and
cable installations)
The intended use is generally not for the general public. Instead, it is generally for
industry/commercial use.