User's Manual

hwc_appendixb.fm
Regulatory information
Wireless APs 26XX and 36XX
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 395
Caution: Channels designated as N/S are not supported by the antenna and
must not be selected from the Wireless APs configuration pages.
Caution: For antenna #3 (Cushcraft SL24513Pxxxxxx), do not select the Auto
channel selection (on the Wireless APs configuration pages) for the 11a radio.
Instead, only select a channel from the listed supported channels in Table 36.
Operating on a channel that is NOT supported (N/S) is in violation of the law.
Caution: If you select the Auto channel selection (on the Wireless APs
configuration pages), you must also select the power values listed in Table 40.
DO NOT select a higher power than the value listed in Table 40.
RF safety distance
The antennas used for this transmitter must be installed to provide a separation
distance of at least 25 cm from all persons and must not be co-located or
operating in conjunction with another antenna or transmitter.
Antenna 11a (dBm) 11b/g (dBm)
#1 N/S 10
#2 14 13
#3 17 13
#4 14 10
#5 14 12
#6 N/S 13
Table 40 Auto channel selection