User's Manual

hwc_appendixb.fm
Regulatory information
Wireless APs 26XX and 36XX
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 391
• The maximum antenna gain permitted for the AP36XX operating in the
5725-5825 MHz band to comply with the e.i.r.p. limits specified for
point-to-point and non point-to-point operation as appropriate is 6 dBi for the
internal antenna and 5 dBi for the external antenna.
B.2.4.2 Canada conformance standards
This equipment meets the following conformance standards:
Safety
• C22.2 No.60950-1-03
• UL 2043 Plenum Rated as part of UL 60950-1. Suitable for use in
environmental air space in accordance with Sections 2-128, 12-010(3) and
12-100 of the Canadian Electrical Code, Part 1, C22.1
EMC
• ICES-003, Class B
Radio transceiver
• RSS-210 (2.4 GHz and 5GHz)
Other
• IEEE 802.11a (5 GHz)
• IEEE 802.11b/g (2.4 GHz)
• IEEE 802.11n (AP36XX)
• IEEE 802.3af (PoE)
B.2.4.3 AP2620 optional 3rd party external antennas
The AP2620 external antenna APs can also be used with optional certified 3rd
party antennas. However, in order to comply with the local laws and regulations,
an approval may be required by the local regulatory authorities. The following
optional antennas have been tested with and approved for use with the external
antenna model.
Caution: When using an approved 3rd party external antenna (other than the
default), the power must be adjusted according to these tables.
Professional installation
This device must be professionally installed. The following are the requirements
of professional installation: