User's Manual

Availability, mobility, and controller functionality
hwc_controlleravailmobility.fm
Defining management users
A31003-W1050-U100-2-7619
, March 2008
264 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
5. From the Port drop-down list, click the port on the HiPath Wireless Controller
to be used for the mobility agent process. Ensure that the port selected is
routable on the network.
6. In the Heartbeat box, type the time interval (in seconds) to wait for a
connection establishment response before trying again. The default is 60
seconds.
7. From the Discovery Method drop-down list, click one of the following:
•SLPD – Service Location Protocol Daemon is a background process
acting as a SLP server. It provides the functionality of the Directory Agent
and Service Agent for SLP. Use SLP to support the discovery of
siemensNET service to attempt to locate the area mobility manager
controller.
• Static Configuration – Select Static Configuration if you want to enter
the IP address of the mobility manager manually. Defining a static
configuration for a mobility manager IP address bypasses SLP discovery.
8. In the Mobility Manager Address box, type the IP address for the
designated mobility manager.
9. To save your changes, click Save.
7.2.1 Displays for the mobility manager
For more information, see Section 10.1.4, “Viewing displays for the mobility
manager”, on page 300.
7.3 Defining management users
On this page you define the login user names that have access to the HiPath
Wireless Assistant, either for HiPath Controller, Access Points and Convergence
Software administrators with read/write privileges, or users with read only
privileges. For each user added, you can also define and modify a user ID and
password.
Note: When adding or modifying a management user, note the following
password character constraints:
• Allowed characters include A-Z a-z 0-9 ~!@#$%^&*()_+|-=\{}[];<>?,./
• Characters not allowed include ` ' " : and space is not valid.