User's Manual

Regulatory information
hwc_appendixb.fm
Wireless APs 26XX and 36XX
A31003-W1050-U100-2-7619
, March 2008
386 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
Note: The qualification testing and results are based on above described
antennas, cable types, lengths, and connector types. Other cable lengths and
connector types are also available which are specified by the suffix part of the part
numbers (for example, SR2405135Dxxxxxx, where the xxxxxx suffix represents
cable length and/or connector type). The antenna feedline used in testing are the
minimum cable length. Longer cable may be used with losses greater than or
equal to the cables used for testing. The maximum power settings must be
adjusted according to these tables.
Note: If one of the following antenna is used, you must select an operating
channel (on the Wireless APs configuration pages) and the corresponding
allowed max power from the values listed in Table 36. DO NOT select a higher
power than the value listed in Table 36.
# Model Application Shape Gain (dBi) Frequency
(MHz)
Coax Cable
Length/Type
Connector Type
Cushcraft
#1 SR2405135D
xxxxxx
indoor Directional 5 2400-2500 3 feet / 19AWG
CMP(ETL)
C(ETL) 9700851
RPSMA
#2 S24493DSxxx
xxx
indoor Omni, 2
inputs
3 2400-2500
4900-5990
3 feet / 19AWG
CMP(ETL)
C(ETL) 9700851
RPSMA, 2ea.
#3 SL24513Pxxx
xxx
indoor Omni 3 2400-2500
5150-5350
3 feet / 19AWG
CMP(ETL)
C(ETL) 9700851
RPSMA
#4 S24497Pxxxx
xx
indoor Directional 7 2400-2500
4900-5990
3 feet / 19AWG
CMP(ETL)
C(ETL) 9700851
RPSMA
Hyperlink Tech
#5 HG2458CUxx
x
indoor Omni 3 2300-2600
4900-6000
1 foot / 20AWG
Coleman Cable
921021
N-female
Maxrad
#6 MDO24005PT
xxxxxx
indoor Omni, 2
inputs
5.2 2400-2485 3 feet / 19AWG
CMP(ETL)
C(ETL) 9700851
RPSMA, 2ea.
Table 35 List of FCC approved antennas