User's Manual

hwc_appendixb.fm
Regulatory information
Wireless APs 26XX and 36XX
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 385
B.2.3.4 AP2620 optional 3rd party external antennas
The AP2620 external antenna APs can also be used with optional certified 3rd
party antennas. However, in order to comply with the local laws and regulations,
an approval may be required by the local regulatory authorities. The following
optional antennas have been tested and approved for use with the external
antenna model.
Caution: When using an approved 3rd party external antenna (other than the
default), the power must be adjusted according to these tables.
Professional installation
To comply with FCC part 15 rules in the United States, the system must be
professionally installed to ensure compliance with the Part 15 certification. It is the
responsibility of the operator and professional installer to ensure that only
certified systems are deployed in the United States. The use of the system in any
other combination (such as co-located antennas transmitting the same
information) is expressly forbidden. The following are the requirements of
professional installation:
• The device cannot be sold retail to the general public or by mail order. It must
be sold to dealers.
• Installation must be controlled.
• Installation must be carried out by licensed professionals (equipment sold to
dealers who hire installers)
• Installation requires special training (special programming and antenna and
cable installations)
• The intended use is generally not for the general public. Instead, it is
generally for industry/commercial use.