User's Manual

HiPath Wireless Controller’s physical description
hwc_appendixa.fm
HiPath Wireless C2400 Controller front panel
A31003-W1050-U100-2-7619
, March 2008
372 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
Figure 24 HiPath Wireless C2400 Controller’s LED lights and switches
The description of the LED states and switches is provided below:
• Reset Switch – Reboots the system.
• RUN LED – Indicates the CPU’s initialization has completed and the system
is ready to provide application level services.
• ACT LED – Indicates the system’s software is in active running state.
• WARNING/ERROR LEDs – Indicate a problem in the running state of the
system.
• Whenever either of the alarm LEDs is lit, the seven-segment display
provides the corresponding code point for the error indication. When the
system is fully active and running, the console displays the letter A as
seen in Figure 24.
• LCT Switch – The LCT button is used during the manufacturing process and
is inactive otherwise.
• INT LED – Not used in the current release.
Reset
switch
WARNING
LED
ERROR
LED
INT
LED
LCT switch
RUN
LED
ACT
LED
Seven-Segment display