User's Manual

Availability, mobility, and controller functionality
hwc_controlleravailmobility.fm
Mobility manager
A31003-W1050-U100-2-7619
, March 2008
262 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
3. To enable mobility for this controller, select the Enable Mobility checkbox.
The controller mobility options appear.
4. Select the This Wireless Controller is a Mobility Manager option. The
mobility manager options appear.
5. In the Port drop-down list, click the interface on the HiPath Wireless
Controller to be used for the mobility manager process. Ensure that the
selected interface is routable on the network.
6. In the Heartbeat box, type the time interval (in seconds) at which the mobility
manager sends a Heartbeat message to a mobility agent. The default is 5
seconds.
7. In the SLP Registration drop-down list, click whether to enable or disable
SLP registration.
8. In the Permission list, click the agent IP addresses you want to approve that
are in pending state, by selecting the agent and clicking Approve. New
agents are only added to the domain if they are approved.
You can also add or delete controllers that you want to be part of the mobility
domain. To add a controller, type the agent IP address in the box, and then
click Add. To delete a controller, click the controller in the list, and then click
Delete.
9. Select the Security Mode option: