User's Manual

Page 84 SITRANS LR560 (PROFIBUS PA) – OPERATING INSTRUCTIONS 7ML19985LT01
mmmmm
Parameters
3.6. Allocation
3.6.1. Event Index
The numeric component of the Event Code for a Condensed Status event. Use
the index number to identify a particular event in the list below.
For example:
Event Code for Loss of Echo = S0
Event Index = 0
To select a particular event via the handheld programmer:
a) Go to Enable (3.5.1.) and select Yes to enable Condensed Mode.
b) Go to Event Index (3.6.1.) and enter the event index number corresponding
to the event.
To select a particular event via SIMATIC PDM:
a) Go to Maintenance & Diagnostics > Condensed Status > Enable and
select Yes to enable Condensed Mode.
b) Go to Maintenance & Diagnostics > Allocation Level.
c) For each event, you can select either the Status or the Diagnosis line, then
choose a Status or Diagnosis option from the associated pull-down menu.
Event
Index
Event
Code
Event Description
a)
a)
See General Fault Codes on page 108 for the meaning of each event.
0
S0 Loss of Echo
2
S2 No Tech Power
10
S10 Level Transducer Block (LTB) Scale
11
S11 Internal Temperature Sensor
12
S12 Internal Temperature High
14
S14 AIFB1 PV Range
15
S15 AIFB2 PV Range
25
S25 Internal error
28
S28 Memory RAM
29
S29 Memory EEPROM
30
S30 Memory EEPROM Flags
31
S31 Memory Flash
33
S33 Internal Temperature Calibration
34
S34 Velocity Calibration
35
S35 Receiver Init Calibration
36
S36 Receiver Calibration
37
S37 Technology Module Calibration
38
S38 Technology Module Ramp