User's Manual

ManualsBrandsSiemens Canada Ltd. - Siemens Milltronics Process Instruments ManualsElectronicsSITRANS LR560 Level Probing Radar

Table Of Contents

Safety Notes
- Safety marking symbols
FCC Conformity
- US Installations only: Federal Communications Commission (FCC) rules
CE Electromagnetic Compatibility (EMC) Conformity
Industry Canada
The Manual
- Application Example
Technical Support
Abbreviations and Identifications
SITRANS LR560 Overview
- Programming
  - Local Display Interface (LDI)
- Versions
- Applications
- Approvals and Certificates
Specifications
- Power
- Performance
- Interface
- Mechanical
- Environmental
- Process
- Approvals
- Programmer (infrared keypad)
- Dimensions
Installation
- Pressure Equipment Directive, PED, 97/23/EC
- Mounting location
  - Nozzle location
  - Aimer Adjustment
    - 3" flange 4 and 6" flange
- Air Purging System
  - Purge Connection
    - Purge airflow
- Removable Display
Wiring
- Power
- Connecting SITRANS LR560
  - Basic PLC configuration with PROFIBUS PA
  - Wiring setups for hazardous area installations
- Instructions Specific to Hazardous Area Installations
  - Special Conditions for Safe Use
Local Operation
- Activating SITRANS LR560
- Quick Start Wizard via the LDI push buttons
  - To add or delete digits using the push buttons:
  - To modify a text string:
- Quick Start Wizard via the handheld programmer
- Requesting an Echo Profile
- Device Address
- Level application example
Operating via SIMATIC PDM
- Functions in SIMATIC PDM
- SIMATIC PDM Version
- Quick Start Wizard via SIMATIC PDM
  - Quick Start
- Changing parameter settings using SIMATIC PDM
Operating via FDT (Field Device Tool)
- Device Type Manager (DTM)
- SITRANS DTM
- The instrument EDD
- Configuring a new device via FDT
Parameter Reference
- 1. Quick Start
- 2. Setup
- 3. Diagnostics
- 4. Service
- 5. Communication
  - 5.1. Device Address
  - 5.2. PROFIBUS Ident Number
- 6. Security
  - 6.1. Remote Access
    - 6.1.1. Remote Lockout
  - 6.2. Local Access
    - 6.2.1. Write Protection
- 7. Language
Appendix A: Alphabetical Parameter List
Appendix B: Troubleshooting
- Communication Troubleshooting
- Device Status Icons
- General Fault Codes
- Operation Troubleshooting
Appendix C: Maintenance
- Unit Repair and Excluded Liability
Appendix D: Technical Reference
- Principles of Operation
  - Process Variables
- Echo Processing
- Measurement Response
- Damping
- Loss of Echo (LOE)
  - LOE Timer
  - Fail-safe Behavior
    - Mode (2.5.9.1.)
    - Value (2.5.9.2.)
      - To set a user-defined value
- Temperature derating curve
  - Temperature De-Rating
Appendix E: PROFIBUS PA Profile Structure
- PROFIBUS Level Device Design
- Block Model
Appendix F: Communications via PROFIBUS PA
- Device Configuration tool
  - SIMATIC PDM
    - Electronic Device Description
- Network Configuration
  - The GSD file
- Bus Termination
- Power Demands
- PROFIBUS address
  - Resetting the PROFIBUS address to 126
- Operating as a Profile Device
  - Configuring a device
  - Configuring PROFIBUS PA with an S7-300/ 400 PLC
- Cyclic versus Acyclic Data
  - Cyclic Data
- Status Byte
  - Condensed Status
  - Status Byte
- Diagnostics
- Acyclic Data
Appendix G: Firmware Revision History
Glossary
Index
LCD menu structure

Page 44 SITRANS LR560 (PROFIBUS PA) – OPERATING INSTRUCTIONS 7ML19985LT01

mmmmm

SIMATIC PDM

Changing parameter settings using SIMATIC PDM

Many parameters are accessed via the 5-level menu in PDM. See

Parameters accessed via

pull-down menus

on page 44 for the others.

1) Launch SIMATIC PDM, connect to SITRANS LR560, and upload data from the

device.

2) Adjust parameter values in the parameter value field then press Enter. The status

fields read Changed.

3) Open the Device menu, click on Download to Device, then use File – Save, to save

parameter settings. The status fields are cleared.

Parameters accessed via pull-down menus

You have access to a number of functions via pull-down menus from the menu bar. under

Device or View.

For a complete list, see

Pull-down menus

on page 45.

Notes:

• For a complete list of parameters, see

Parameter Reference

on page 62.

• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some

parameters being updated.

value

fields

pull-down

menus