User's Manual

Page 28 SITRANS LR560 (PROFIBUS PA) – OPERATING INSTRUCTIONS 7ML19985LT01
mmmmm
Quick Start: local
Local Operation
SITRANS LR560 carries out its level measurement tasks according to settings made via
parameters. The settings can be modified locally via the Local Display Interface (LDI)
which consists of an LCD display with push buttons. You can use either the push buttons
or an infrared handheld programmer to make changes.
A Quick Start Wizard provides an easy step-by-step procedure to help you configure your
device for a simple application. There are two ways to access the wizard:
• locally (see
Quick Start Wizard via the LDI push buttons on page 34 or Quick
Start Wizard via the handheld programmer
on page 34)
• from a remote location (see
Quick Start Wizard via SIMATIC PDM on page 40,
or
Configuring a new device via FDT on page 61)
See
Level application example on page 38 for an illustration, and for the complete range
of parameters, see Parameter Reference on page 62.
Activating SITRANS LR560
Power up the device. SITRANS LR560 automatically starts up in Measurement mode. A
transition screen showing first the Siemens logo and then the current firmware revision
is displayed while the first measurement is being processed. The first time the device is
configured, you will be prompted to select a language (English, German, French, Spanish
or Chinese). To change the language again, see Language (7.) on page 101.
Notes:
• To enter Program mode using the push buttons, press . Press to return to
Measurement mode.
• To toggle between Measurement and Program Mode using the handheld
programmer, press Mode .
push buttons