User's Manual

7ML19985LT01 SITRANS LR560 (PROFIBUS PA) – OPERATING INSTRUCTIONS Page 101
mmmmm
Parameters
5.2. PROFIBUS Ident Number
Identifies the device on the network. The Ident Number must match that in the GSD
file (the GSD file provides information on the device to the master).
6. Security
6.1. Remote Access
6.1.1. Remote Lockout
Enables or disables programming via the network and PDM.
6.2. Local Access
6.2.1. Write Protection
Prevents any changes to parameters via PDM or the hand-held programmer.
7. Language
Selects the language to be used on the LCD.
To access Language via SIMATIC PDM:
Navigate to Level Meter > Setup > Local Display.
Options
STD PROFILE
Standard Profile (uses generic GSD for 2 AIFB
[ident # = 0x9701]
* MANUFACTURER
Manufacturer-specific (uses Siemens EDD and
GSD file, which identifies the LR560 [PROFIBUS
PA]) [ident # = 0x816B]
STD – AIFB 1 ONL.
Standard Profile AIFB 1 only (uses generic GSD for
1 AIFB) [ident # = 0x9700]
Note: Default settings in the parameter tables are indicated with an asterisk (*)
unless explicitly stated.
Note: If access control is changed to limit remote access, it can be reset only
via the handheld programmer.
Options
* OFF (Remote operation enabled)
ON (Remote operation disabled)
Hand-held
programmer
Values
Range: 0 to 9999
2457
(unlock value) Off (enables programming)
any other value
On (disables programming)
Options
*ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
CHINESE