User's Manual

ManualsBrandsSiemens Canada Ltd. - Siemens Milltronics Process Instruments ManualsElectronicsSITRANS LR560 Level Probing Radar

Table Of Contents

Safety Notes
- Safety marking symbols
FCC Conformity
- US Installations only: Federal Communications Commission (FCC) rules
CE Electromagnetic Compatibility (EMC) Conformity
Industry Canada
The Manual
- Application Example
Technical Support
- Abbreviations and Identifications
SITRANS LR560 Overview
- Programming
  - Local Display Interface (LDI)
- Versions
- Applications
- Approvals and Certificates
Specifications
- Power
- Performance
- Interface
- Mechanical
- Environmental
- Process
- Approvals
- Programmer (infrared keypad)
- Dimensions
Installation
- Pressure Equipment Directive, PED, 97/23/EC
- Mounting location
  - Nozzle location
  - Aimer Adjustment
    - 3" flange 4 and 6" flange
- Air Purging System
  - Purge Connection
    - Purge airflow
- Removable Display
Wiring
- Power
- Connecting SITRANS LR560
  - Basic Configuration with Foundation Fieldbus (H1)
- Wiring Setups for hazardous area installations
  - Configuration with Foundation Fieldbus for hazardous areas
    - Configuration for hazardous areas (continued)
  - Instructions specific to hazardous area installations
    - (Reference European ATEX Directive 94/9/EC, Annex II, 1.0.6)
    - Special Conditions for Safe Use
Local Operation
- Activating SITRANS LR560
- To configure a device via the local user interface
  - Quick Start Wizard via the LDI push buttons
    - To add or delete digits using the push buttons:
    - To modify a text string:
  - Quick Start Wizard via the handheld programmer
- Requesting an Echo Profile
- Device Address
- Level application example
Operating via AMS Device Manager
- Functions in AMS Device Manager
  - Key Features of AMS Device Manager version 9.0.
  - Block location of features
- Programming via AMS Device Manager
- Adding a new device
  - Electronic Device Description (EDD)
- Startup
- Configuring a new device
  - Quick Start Wizard via AMS Device Manager
    - Quick Start Wizard steps
- Changing Block Modes
  - To change Resource Block mode
- Configure/Setup Parameters
- Password Protection
  - Login types
  - User Manager utility
    - To configure a new user/edit existing user:
AMS Menu Structure
Parameter Reference
- 1. Quick Start
- 2. Setup
- 3. Diagnostics
- 4. Service
- 5. Communication
- 6. Security
  - 6.1. Remote Access
    - 6.1.1. Remote Lockout
  - 6.2. Local Access
    - 6.2.1. Write Protection
    - 6.2.2. Local Operation
- 7. Language
Appendix A: Alphabetical Parameter List
Appendix B: Troubleshooting
- Communication Troubleshooting
- Device Status Icons
- General Fault Codes
- Operation Troubleshooting
Appendix C: Maintenance
- Unit Repair and Excluded Liability
Appendix D: Technical Reference
- Principles of Operation
  - Process Variables
- Echo Processing
  - Process Intelligence
  - Echo Selection
- Measurement Range
  - Near Range (2.4.1.)
  - Far Range (2.4.2.)
- Measurement Response
- Damping
- Loss of Echo (LOE)
  - Loss of Echo (LOE) Timer (2.3.4.)
- Temperature derating curves
  - Temperature De-Rating
Appendix E: Communications
- Foundation Fieldbus (FF) Protocol
- Field Communicator 375 (FC375)
Appendix F: Firmware Revision History
Glossary
Index
LCD menu structure

Page 2 SITRANS LR560 (FF) – OPERATING INSTRUCTIONS 7ML19985LY01

mmmmm

SITRANS LR560 (FF)

CE Electromagnetic Compatibility (EMC) Conformity

This equipment has been tested and found to comply with the following EMC Standards:

Industry Canada

a) Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

b) This device shall be installed and operated in a completely enclosed container to

prevent RF emission which otherwise can interfere with aeronautical navigation.

Installation shall be done by trained installers, in strict compliance with the

manufacturer’s instructions.

c) The use of this device is on a “no-interference, no-protection” basis. That is, the

user shall accept operations of high-powered radar in the same frequency band

which may interfere with or damage this device. On the other hand, level probing

devices found to interfere with primary licensing operations will be required to be

removed at the user’s expense.

EMC Standard Title

CISPR 11:2004/EN

55011:1998+A1:1999&A2:2002, CLASS B

Limits and methods of measurements of radio

disturbance characteristics of industrial, scientific,

and medical (ISM) radio-frequency equipment.

EN 61326:1997+A1:1998+A2:2001+A3:2003

(IEC 61326:2002)

Electrical Equipment for Measurement, Control and

Laboratory Use – Electromagnetic Compatibility.

EN61000-4-2:2001

Electromagnetic Compatibility (EMC) Part 4-2:Testing

and measurement techniques – Electrostatic

discharge immunity test.

EN61000-4-3:2002

Electromagnetic Compatibility (EMC) Part 4-3:

Testing and measurement techniques – Radiated,

radio-frequency, electromagnetic field immunity test.

EN61000-4-4:2004

Electromagnetic Compatibility (EMC) Part 4-4:

Testing and measurement techniques – Electrical

fast transient/burst immunity test.

EN61000-4-5:2001

Electromagnetic Compatibility (EMC) Part 4-5:

Testing and measurement techniques – Surge

immunity test.

EN61000-4-6:2004

Electromagnetic Compatibility (EMC) Part 4-6:

Testing and measurement techniques – Immunity to

conducted disturbances, induced by radio-frequency

fields.

EN61000-4-8:2001

Electromagnetic Compatibility (EMC) Part 4-8:

Testing and measurement techniques – Power

frequency magnetic field immunity test.