User's Manual

7ML19985LY01 SITRANS LR560 (FF) – INSTRUCTION MANUAL Page 43
mmmmm
AMS Device Manager
Programming via AMS Device Manager
Navigating through the parameters
• A navigation window on the left-hand side of the screen allows you to navigate
through the parameter menu structure (see AMS Menu Structure on page 75.)
• Some parameters are accessed from within the dialog window that opens when you
click on an icon in the navigation window.
• In general, process parameters are accessed through the Level Transducer Block,
and device parameters are accessed through the Resource Block.
Pull-down menu access
A pull-down menu under Actions provides alternative access to several features.
Changing parameter settings
1) Modify parameter values in the parameter value field in Configure/Setup view, then
click Apply to write the new values to the device. (The Apply button is activated
when a parameter is modified.) The parameter field will display in yellow until the
value has been written to the device.
2) Click OK if you wish to update all parameters and exit to Device Connection View.
Click CANCEL to exit without saving changes.
Notes:
• While the device is in PROGRAM mode the output remains active and continues to
respond to changes in the device.
• Do not use the handheld programmer at the same time as AMS Device Manager, or
erratic operation may result. (To disable operation via the handheld programmer,
see Local Operation (6.2.2.) on page 122.)
Notes:
• For a complete list of parameters accessible via AMS, see
AMS Menu Structure on
page 75.
• For parameters followed by a reference number, additional information is available
in
Parameter Reference on page 86.
Action menu items