User's Manual

7ML19985LY01 SITRANS LR560 (FF) – INSTRUCTION MANUAL Page 105
mmmmm
Parameters
2.5.4.3. Unit
Engineering unit to be displayed with the output value .
2.5.4.4. Decimal Point
Read only. The number of digits to display after the decimal point (fixed to
one).
2.5.5. Output Scaling
Scales the Process Variable. The function block parameter OUT SCALE
contains the values of the lower limit and upper limit effective range in AIFB 1
units.
2.5.5.1. Lower Value
Defines the operational lower range value of the output value in AIFB 1
units.
2.5.5.2. Upper Value
Defines the operational upper range value of the output value in AIFB 1
units.
2.5.5.3. Unit
Engineering unit to be displayed with the output value
2.5.5.4. Decimal Point
Read only. The number of digits to display after the decimal point (fixed to
two).
Options
m, cm, mm, ft, in, %, Not Used, Unknown, Special
* %
Values
Range: -999999 to 999999
Default: 0 %
Values
Range: -999999 to 999999
Default: 100 %
Options
m, cm, mm, ft, in, %, Not Used, Unknown, Special
* %