User's Manual

7ML19985LY01 SITRANS LR560 (FF) – INSTRUCTION MANUAL Page 103
mmmmm
Parameters
2.5. AIFB 1
2.5.1. Static Revision Number
The revision level of the static data associated with Analog Input Function
Block 1. The Static Revision No. is updated whenever a configuration
parameter is changed.
2.5.2. Mode
Used to request an operating mode from the Analog Input Function Block. It
allows you to put SITRANS LR560 into Manual mode (used in conjunction with
Simulation) or Out-of-Service mode for maintenance purposes.
Manual Mode can be used when simulating output.
Notes:
• All AIFB parameters are
read only via local operation, and not visible to AMS
Device Manager. They can be changed only by a remote host such as DeltaV or
NI-FBUS-Configurator.
• AIFB 1 and AIFB 2 are not active upon initial startup. These blocks will show Out
of Service on the LCD at startup. If these blocks are needed for an FF
application, use a tool such as DeltaV or NI-FBUS-Configurator to configure and
schedule the blocks. See the manual
Foundation Fieldbus for Level instruments
(7ML19985MP01) for details.
• Default settings in the parameter tables are indicated with an asterisk (*) unless
explicitly stated.
Note: Ensure that Mode is returned to AUTO when simulation or
maintenance are completed.
Setting Description Output value
AUTO automatic the automatically-recorded measured value
MAN manual a manually-set fixed simulation value
O/S function block
disabled
the preset safety value