User's Manual
Table Of Contents
- Safety Notes
- FCC Conformity
- CE Electromagnetic Compatibility (EMC) Conformity
- Industry Canada
- The Manual
- Technical Support
- SITRANS LR560 Overview
- Specifications
- Installation
- Wiring
- Local operation
- Operating via SIMATIC PDM
- Operating via FDT (Field Device Tool)
- Operating via AMS Device Manager
- AMS Menu Structure
- Parameter Reference
- Appendix A: Alphabetical Parameter List
- Appendix B: Troubleshooting
- Appendix C: Maintenance
- Appendix D: Technical Reference
- Appendix F: HART Communications
- Appendix G: Firmware Revision History
- Glossary
- Index
- LCD menu structure
Page 78 SITRANS LR560 (mA/HART) – INSTRUCTION MANUAL 7ML19985KB01
mmmmm
Parameters
i) Navigate to Echo Profile (3.2.) and
press RIGHT arrow to request a
profile. The false echo is now
screened out and the true echo
selected.
j) Press LEFT arrow to return to
Measurement mode.
1.3. Copy Parameters to Display
Transfers parameter settings from a device to the local display interface.
PARAM UPLOAD is displayed, then the device returns to Measurement mode.
1.4. Copy Parameters from Display
Transfers parameter settings from the local display interface to a device.
PARAM DOWNLOAD is displayed, then the device returns to Measurement mode.
1.5. Copy Firmware to Display
Transfers firmware from a device to the local display interface.
SW UPLOAD is displayed, then the device returns to Measurement mode.
false
echo
true echo
See
Connecting SITRANS LR560
on page 22 for instructions
on removing the local display interface.
• Press RIGHT arrow to Edit.
• Press DOWN arrow to select
Start and RIGHT arrow to
begin the transfer.
• Press RIGHT arrow to Edit.
• Press DOWN arrow to select
Start and RIGHT arrow to
begin the transfer.
• Press RIGHT arrow to Edit.
• Press DOWN arrow to select
Start and RIGHT arrow to begin
the transfer.