User's Manual

Page 64 SITRANS LR560 (mA/HART) – INSTRUCTION MANUAL 7ML19985KB01
mmmmm
AMS Device Manager
Navigate to Configure/Setup > Setup > Signal Processing and click on TVT. Click on one of the
two tabs to access the parameters listed:
TVT Setup [see TVT setup (2.8.) on page 93]
• Auto False Echo Suppression
• Auto False Echo Suppression Range
• Hover Level
• Shaper Mode
TVT Shaper
• Shaper breakpoints 1 to 120. (Turn TVT Setup/Shaper Mode on to activate.)
Manual TVT Curve
Displays the effects of the TVT shaper modifications. Navigate to Configure/Setup > Setup >
Signal Processing and click on Manual TVT Curve.
Echo Profile
• Navigate to Configure/Setup > Setup > Signal Processing and click on Echo
Profile.
• To view a previous profile, click the drop-down arrow on the Time field and
select the desired profile (note: available only using AMS version 10.1 or later).
Local Display
Navigate to Configure/Setup > Setup > Local Display for access to:
•Language
• LCD Contrast [see LCD Contrast (4.6.) on page 104]
• LCD Backlight [see LCD Backlight (4.5.) on page 103]
Maintenance and Diagnostics
Navigate to Maintenance and Diagnostics for access to:
Remaining Device Lifetime [see Remaining Device Lifetime (3.6.) on page 98]
• Lifetime expected
• Remaining Lifetime
• Time in Operation
• Activation of Reminders
• Reminder 1 before Lifetime (Required)
• Reminder 2 before Lifetime (Demanded)
a) Open the window Remaining Device Lifetime.
b) After modifying values/units as required, click on Apply to accept the change.