User's Manual

7ML19985KB01 SITRANS LR560 (mA/HART) – INSTRUCTION MANUAL Page 29
mmmmm
Quick Start: local
Programming SITRANS LR560
Change parameter settings and set operating conditions to suit your specific application.
(For remote operation, see Operating via SIMATIC PDM on page 37 or Operating via
AMS Device Manager
on page 54.)
Parameter menus
Parameters are identified by name and organized into function groups, then arranged in a
5-level menu structure (see
LCD menu structure on page 147).
1. Enter PROGRAM mode
Using LDI buttons:
• Press to enter Program Mode
Using handheld programmer:
• Point the programmer at the display from a
maximum distance of 300 mm (1 ft).
• RIGHT arrow activates PROGRAM
mode and opens menu level 1.
• Mode opens the menu level last
displayed in PROGRAM mode within the last
10 minutes, or menu level 1 if power has
been cycled since then.
Notes:
• While the device is in PROGRAM mode, the output remains active and continues to
respond to changes in the device.
• SITRANS LR560 automatically returns to Measurement mode after a period of
inactivity in PROGRAM mode (
Menu Timeout 2.1.9. on page 80).
Note: For the complete list of parameters with instructions, see Parameter Reference
on page 76.
1. QUICK START
2. SETUP
2.1 DEVICE
2.2 SENSOR
2.2.1 UNITS
2.2.3 DAMPING FILTER
display
handheld programmer
(ordered separately)
max. 300 mm
(1.0 ft)