User's Manual

Page 26 SITRANS LR560 (mA/HART) – INSTRUCTION MANUAL 7ML19985KB01
mmmmm
Quick Start: local
Local operation
SITRANS LR560 carries out its level measurement tasks according to settings made via
parameters. The settings can be modified locally via the optional Local Display Interface
(LDI) which consists of an LCD display with buttons. You can use either the push buttons
or an infrared handheld programmer to make changes.
A Quick Start Wizard provides an easy step-by-step procedure to help you configure the
device for a simple application. There are two ways to access the wizard:
• locally (see Quick Start Wizard via the LDI push buttons on page 32 or Quick
Start Wizard via the handheld programmer
on page 32)
• from a remote location (see Quick Start Wizard via SIMATIC PDM on page 38 or
Operating via AMS Device Manager on page 54.)
See
Level application example on page 36 for an illustration, and for the complete range
of parameters, see Parameter Reference on page 76
Activating SITRANS LR560
Power up the device. A transition screen showing first the Siemens logo and then the
current firmware revision is displayed while the first measurement is being processed.
SITRANS LR560 automatically starts up in Measurement mode. The first time the device
is configured, you will be prompted to select a language (English, German, French,
Spanish or Chinese). To change the language again, see Language (7.) on page 110.
Notes:
• To enter Program mode using the device buttons, press . Press to return to
Measurement mode.
• To toggle between Measurement and Program Mode using the handheld
programmer, press Mode .
push buttons