User's Manual

Page 24 SITRANS LR560 (mA/HART) – INSTRUCTION MANUAL 7ML19985KB01
mmmmm
Wiring
Wiring setups for hazardous area installations
The following wiring options are available for hazardous area installations:
• Non-Sparking/Energy Limited wiring (Europe) and Dust Ignition Proof wiring
(Europe/International)
on page 24
• Non-incendive and Dust Ignition Proof wiring (US/Canada) on page 24
In all cases, check the device label on your instrument, and confirm the approval rating.
1. Non-Sparking/Energy Limited wiring (Europe) and
Dust Ignition Proof wiring (Europe/International)
• For power demands, see Loop power on page 132.
• For wiring requirements follow local regulations.
•See also
Instructions specific to hazardous area installations on page 25 and the
ATEX certificate listed above.
2. Non-incendive and Dust Ignition Proof wiring (US/
Canada)
For power demands, see Temperature derating curve on page 131.
The ATEX certificate listed on the device label can be downloaded from the product page of
our website at: www.siemens.com/sitransLR560.
The IECEx certificate listed on the device label can be viewed on the IECEx website. Go to:
http://iecex.iec.ch and click on Ex Equipment Certificates of Conformity then enter the
certificate numbers IECEx Sira 09ATEX9356X and Sira 09ATEX4357X.
FM/CSA Class 1, Div 2 connection drawing number A5E02795836 can be downloaded from
the product page of our website at: www.siemens.com/sitransLR560
.