User's Manual

Page 8 SITRANS LR560 (mA/HART) – INSTRUCTION MANUAL 7ML19985KB01
mmmmm
Specifications
Memory:
• non-volatile EEPROM
• no battery required
Interface
Analog output
• signal range 4 to 20 mA (±0.02 mA accuracy)
upper limit 20 to 22.6 mA adjustable
lower limit 3.56 to 4 mA adjustable
• fail signal 3.56 mA to 22.6 mA; or last value
• load Max. 550 Ω @ 24 V DC
Communication: HART
• Load 230 to 550 Ω, 230 to 500 Ω when connecting a
coupling module
• Max. Line Length
1)
multi-wire: ≤ 1500 m (4921 ft)
• Protocol HART
2)
, Version 6.0
Configuration
• remote Siemens SIMATIC PDM or AMS Device Manager
(PC) or FDT such as PACTWARE
• local Siemens infrared handheld programmer, local
control buttons, or HART handheld communicator
Optional removeable graphic LCD, with bar graph representing level
local display interface (LDI)
3)
Mechanical
Process Connections:
• universal flat-faced flanges
4)
3"/80 mm, 4"/100 mm, 6"/150 mm
materials stainless steel 316L (1.4404 or 1.4435), or 304
• Aimer flanges
4)
3"/80 mm, 4"/100 mm, 6"/150 mm
material polyurethane powder-coated cast aluminum
1)
Max. length depends on wire type. See www.hartcomm.org for more details.
2)
HART® is a registered trademark of HART Communication Foundation.
3)
Display quality will be degraded in temperatures below -20 °C (-4 °F) and above +65 °C (+149 °F).
4)
Universal flange mates with EN 1092-1 (PN16)/ASME B16.5 (150 lb)/JIS 2220 (10K) bolt hole
pattern.