User's Manual
Table Of Contents
- Table of Contents
- SITRANS LR 460
- Specifications
- Installation
- Wiring
- 4-20 mA Start Up
- Local Operation
- LCD menu structure
- HART Communications
- Remote operation via PROFIBUS PA
- PROFIBUS PA Profile Structure
- Appendix A: Parameter Descriptions
- 1. Identification
- 2. Input
- 3. Output
- 5. Maintenance settings
- 6. Condensed Status Setup
- 6.1. Condensed Status Mode
- 6.1.1. Loss of Echo S0 (Status; Diagnosis)
- 6.1.2. Cable Fault S1 (Status; Diagnosis)
- 6.1.3. No Tech Power S2 (Status; Diagnosis)
- 6.1.4. Device Lifetime Maintenance Required Limit S3 (Status; Diagnosis)
- 6.1.5. Device Lifetime Maintenance Demanded Limit S4 (Status; Diagnosis)
- 6.1.8. Sensor Lifetime Maintenance Demanded Limit S7 (Status; Diagnosis)
- 6.1.9. Device Service Maintenance Required Limit S8 (Status; Diagnosis)
- 6.1.10. Device Service Maintenance Demanded Limit S9 (Status; Diagnosis)
- 6.1.11. LTB Scale S10 (Status; Diagnosis)
- 6.1.12. Internal Temp Sensor S11 (Status; Diagnosis)
- 6.1.13. Internal Temp High S12 (Status; Diagnosis)
- 6.1.16. AIFB2 PV Range S15 (Status; Diagnosis)
- 6.1.19. Calibration Schedule Maintenance Demanded Limit S18 (Status; Diagnosis)
- 6.1.30. Memory EEPROM S29 (Status; Diagnosis)
- 6.1.31. Memory EEPROM Flags S30 (Status; Diagnosis)
- 6.1.32. Memory Flash S31 (Status; Diagnosis)
- 6.1.33. Ident Violation S32 (Status; Diagnosis)
- 6.1.34. Internal Temperature Calibration S33 (Status; Diagnosis)
- 6.1. Condensed Status Mode
- Appendix B: Technical Reference
- Appendix C: Troubleshooting
- Appendix D: Maintenance
- Appendix E: Software Revision History
- Glossary
- Index
Page 2 SITRANS LR 460 – INSTRUCTION MANUAL 7ML19985JM01
mmmmm
SITRANS LR 460
The Manual
This manual will help you set up your SITRANS LR 460 for optimum performance.
SITRANS LR 460 is available in two versions (HART or PROFIBUS PA), and the manual is
in three parts:
Part I: information common to both versions
• introduction to LR 460
• specifications
• installation
•wiring
Part II: SITRANS LR 460 4-20 mA version
• 4-20 mA Quick Setup
• local operation using handheld programmer
• LCD menu charts
• HART communications
Part III: SITRANS LR 460 PROFIBUS PA version:
• PROFIBUS PA Quick Setup
• remote operation
•PA profile
•PA Data Maps
Appendices provide further information common to both models:
•
Appendix A: Parameter Descriptions
•
Appendix B: Technical Reference
•
Appendix C: Troubleshooting
•
Appendix D: Maintenance
•
Appendix E: Software Revision History
We always welcome suggestions and comments about manual content, design, and
accessibility. Please direct your comments to techpubs.smpi@siemens.com
.
For other Siemens Milltronics level measurement manuals, go to:
www.siemens.com/level
, and look under Level Measurement.
Notes:
• Please follow the installation and operating procedures for a quick, trouble-free
installation and to ensure the maximum accuracy and reliability of your SITRANS LR 460.
This manual applies to the SITRANS LR 460 only.