User's Manual

7ML19985FH04 SITRANS LR 400 – INSTRUCTION MANUAL Page 96
mmmmm
Appendix V
Supported HART Commands:
The SITRANS LR 400 conforms to HART rev. 5 and supports the following:
Universal Commands
0, 1, 2, 3, 6, 11, 12, 13, 14, 15, 16, 17, 18, 19
Common Practice Commands
33, 34, 35, 36, 37, 38, 40, 41, 42, 43, 44, 48, 50, 51, 53, 59, 108, 109, 110
Device Specific Commands
Command 128 Read static data material
Command 129 Write static data material
Command 130 Read dynamic variables 1
Command 131 Read dynamic variables 2
Command 132 Read tank parameters
Command 133 Write tank parameters
Command 134 Read tank design
Command 135 Write tank design
Command 136 Read calibration array
Command 137 Read calibration array
Command 138 Read stilling pipe conditions
Command 139 Write stilling pipe conditions
Command 140 Read measuring conditions
Command 141 Write measuring conditions
Command 142 Read sensor set-up 1
Command 143 Write sensor set-up 1
Command 144 Read fix distance
Command 145 Write fix distance
Command 146 Read customer code
Command 147 Write customer code
Command 148 Read sensor set-up 2
Command 149 Write sensor set-up 2
Command 150 Read analog parameters
Command 151 Write analog parameters
Command 152 Read temperature indicator
Command 154 Read trim values
Command 155 Write trim values
Command 156 Clear tank calibration
Command 157 Read device order number
Command 158 Read serial number
Command 159 Read local display select
Command 160 Write local display select
Command 161 Read display parameters
Command 162 Write display parameters
Command 163 Read digital out parameters 1
Command 164 Write digital out parameters 1
Command 165 Read digital out parameters 2
Command 166 Write digital out parameters 2
Command 167 Read lower range values
Command 168 Write lower range values