User's Manual

Page 84 SITRANS LR 400 – INSTRUCTION MANUAL 7ML19985FH04
mmmmm
Appendix II
Appendix II: Programming Chart
Note: Parameter menus are dependent on selections made by the user.
In some cases, parameter menus are renumbered according to the
selection made at the previous menu level. Therefore, the parameter
numbering shown below includes the standard parameter numbering.
Menu
Identification
Number
Parameter Name Value
1.1 Language local
1.2 Length unit
1.3 Nozzle height
1.4 Tank height
1.5 Level URV
1.6 Level LRV
1.7 Level damping
2.1 Multi-display
2.2 Level
2.3 Volume
2.4 Mass
2.5 Current output
2.6 Digital output
3.1.1.1 Operating hours
3.1.1.2 Maximum temperature
3.1.1.3 Minimum temperature
3.1.1.4 Aging
3.1.1.5 Hours > 85°C
3.1.x Sensor, electronics, software, application,
parameters and or service
3.2.1 Self-test
3.2.2 Display test
3.3.1 Simulate AO
3.3.2 Simulate DO
3.4.1 Raw value
3.4.2 Echo amplitude
3.4.3 S/N ratio
3.4.4 Validity
3.4.5 Sensor temperature
4.1 Units
4.1.1 Length unit
4.1.2 Volume unit
4.1.3 Mass unit
4.1.4 Temperature unit
4.1.5 Other units
4.2.1.1 Nozzle height
4.2.1.2 Tank height
4.2.1.3 Stilling pipe?