User's Manual

Page 4 SITRANS LR 400 – INSTRUCTION MANUAL 7ML19985FH04
mmmmm
General Information
The terminals for the power cable and the signal cable are behind the connection cover
on the left side of the housing. The signal cable must be fed in from the right through the
cable glands.
The end of the antenna must reach inside the vessel through the vessel nozzle (see
page 19).
If the device is rotated, return the orientation of the housing to its previous position with
reference to the flange, to ensure similar performance.
housing
connection
cover
intermediate
flange
horn antenna
process flange
threaded ring
display module
electronics cove
r
cable gland
device tag
hand programme
r
(ordered
separately)
Solids Version
Arrows required