User's Manual

7ML19985FH04 SITRANS LR 400 – INSTRUCTION MANUAL Page 68
mmmmm
Parameters (Profibus PA)
4.2.4.2: Level LRV = [1.6]
4.2.4.3: Level damp-
ing
= [1.7]
4.2.4.4: MinWarn
level
Limit before reaching
lower limit value
0 m numerical value
4.2.4.5: MinLim level Lower limit value of the
level (See Functional
Dimensions Diagram)
0 m numerical value
4.2.4.6: MaxLim level Upper limit value of the
level (See Functional
Dimensions Diagram)
20 m numerical value
4.2.4.7: MaxWarn
level
Limit before reaching
upper limit value
20 m numerical value
4.2.4.8: HYST level Hysteresis of the level
limit values
0.5 m numerical value
4.2.5: Volume param.
4.2.5.1: Volume URV Full scale of the volume
20 m
3
numerical value
4.2.5.2: Volume LRV Start of scale of the vol-
ume
0 m
3
numerical value
4.2.5.3: Volume
damping
Damping of the volume 1 s numerical value
4.2.5.4: MinWarn vol-
ume
Limit before reaching
lower limit value
0 m
3
numerical value
4.2.5.5: MinLim vol-
ume
Lower limit value of the
volume
0 m
3
numerical value
4.2.5.6: MaxLim vol-
ume
Upper limit value of the
volume
20 m
3
numerical value
4.2.5.7: MaxWarn
volume
Limit before reaching
upper limit value
20 m numerical value
4.2.5.8: HYST volume Hysteresis of the volume
limit values
0.5 m
3
numerical value
4.2.5.9: Tank charac-
teristic
Determining the tank
characteristic
Calculate Calibrate/table
Calculate
4.2.5.A: Calibrate/table
or
4.2.5.A: Calculate
Parameters (PROFIBUS PA)
Note: For parameter descriptions, please refer to the associated HART parameters on
pages 30 to 58.
Parameter, menu
identification
Description
Factory
Setting
Setting
Possibilities