User's Manual

Table Of Contents

Page 61 SITRANS LR 400 – INSTRUCTION MANUAL 7ML19985FH04

mmmmm

Parameters (Profibus PA)

4.6.6: Descriptor (according to customer specifications)

Measuring point description

4.6.7: Message (according to customer specifications)

Measuring point message, e.g. the date of the last check or clean

4.6.8: Manufacturer Identification

4.6.8.1: Serial Number (F = unique number)

Factory serial number

4.6.8.2: Order Number (according to customer

specifications)

Device order number (delivery state)

4.6.8.3: Fld Device Revision (F = Number)

Device version

4.6.8.4: Software Revision (F = Number)

4.6.8.5: Hardware Revision (F = Number)

4.6.8.6: Antenna Offset (F = approx. 0.5 m [calibration value])

Distance from sensor to flange

The antenna offset defines the propagation time of the measuring signal between the

sensor and the flange as a distance. It is preset at the factory and cannot be changed.

Value up to any 16 characters

Value Up to any 32 characters

Value non-editable