User's Manual

Table Of Contents

Page 53 SITRANS LR 400 – INSTRUCTION MANUAL 7ML19985FH04

mmmmm

Parameters (HART)

4.2.6.8 Calibrate/table or Calculate (for qualified personnel

only)

4.2.6.8 Calibrate/table

4.2.6.8.1: Calibrate (for qualified personnel only)

4.2.6.8.2: Enter table (for qualified personnel only)

4.2.6.8.3: Show table (for qualified personnel only)

4.2.6.8.4: Clear table (for qualified personnel only)

4.2.6.8 Calculate

4.2.6.8.1: Tank design (for qualified personnel only)

4.2.6.8.2: Bottom design (for qualified personnel only)

4.2.6.8.3: Tank volume (for qualified personnel only)

4.2.6.8.4: Tank height (for qualified personnel only)

4.2.6.9: Density (for qualified personnel only)

4.2.7.x: User1 Parameters (for qualified personnel only)

All parameters in range 4.2.7.x are for Factory Authorized Personnel Only. Advanced echo

processing parameters should only be modified by qualified personnel.

4.2.8.x: User2 Parameters (for qualified personnel only)

All parameters in range 4.2.8.x are for Factory Authorized Personnel Only. Advanced echo

processing parameters should only be modified by qualified personnel.

Note: The value of Parameter 4.2.6.8 is determined by the selection (Calibrate/table

or Calculate) in Parameter 4.2.6.7.