User's Manual

Page 49 SITRANS LR 400 – INSTRUCTION MANUAL 7ML19985FH04
mmmmm
Parameters (HART)
4.2.5: Volume Parameters
To calculate the volume of the measuring medium, you need the level parameters
(Parameter 4.2.4) in the units selected according to Parameter 4.1.1 and additionally a tank
characteristic (Parameter 4.2.5.7).
4.2.5.1: Volume URV (F = 20 m
3
)
Full scale of volume
4.2.5.2: Volume LRV (F = 0 m
3
)
Start of scale of volume
4.2.5.3: Volume Damping (F = 1 s)
Damping of volume
4.2.5.4: MinLim Volume (F = 0 m
3
)
Lower limit value of volume
4.2.5.5: MaxLim Volume (F = 20 m
3
)
Upper limit value of volume
4.2.5.6: HYST Volume (F = 0.5 m
3
)
Hysteresis of the volume limit values
4.2.5.7: Tank Characteristic (F = Calculate)
Determining the vessel characteristic
Value numerical value
Value numerical value
Value numerical value
Value numerical value
Value numerical value
Value numerical value
Value
Calibrate/table
Calculate